![]() Dissolve 100g of powder in 5-10 L of water. ‼️ Optimum stencil thickness for virtually every mesh count is achieved by applying only one coat to each side of the screen using a round edged coating trough, cutting coating times 50 to 75% in some cases. KIWO Stencil Remover Powder / Screen stripper 100 gram concentrate Use as a 1-2 aqueous solution. ‼️ If a thicker build of layers needed, extra coats are necessary to apply onto the squeegee side of screen. On the other side of screen, repeat the same action, one or two coats of KIWO Polycol W630 Emulsion. It can also be used in combination with KIWO water based screen cleaners, e.g. Pour emulsion into emulsion scoop coater with an adequate amount of KIWO Polycol W630 Emulsion and apply one or two coats at the side of screen meshĢ. ✔️ Coating, drying, and exposing times are significantly reduced to maximize screen throughput and minimize bottlenecks.ġ. ✔️ Fast exposing, pre-sensitized SBQ emulsion for screen printing garments with plastisol, water-based and produce even discharge inks. Leave product on the mesh for a working time of up to 10 minutes (depending on severity of the stain) for maximum effectiveness. Work product into the mesh on both sides of the screen. Apply GSR DE-HAZER / DEGREASER with a non-abrasive brush or scrub pad to both sides of the screen. The significance of KIWO Polycol W630 Emulsion are: Before use, remove ink and stencil from the screen mesh. It is the light-sensitive liquid or capillary-direct films that you coat or adhere to the de-greased screen fabric prior to taping your film positives in place. We carry stencil remover in concentrations ranging from 1:5 to 1:55. ![]() Screen Printing Emulsion / Photo Emulsion Stencil Remover Screentec carries a variety of concentrated stencil removers from brands including Albatross, CPS and KIWO. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |